Escape 2WD L4-2.5L (2009)
Engine Block Heater: Service and Repair
Block Heater
2.5L
3.0L
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Cooling System/Service and
Repair.
3. NOTICE: Make sure that the block heater wiring is routed and secured away from rotating or hot components, or damage to the wiring
can occur.
Disconnect the block heater electrical connector.