Escape 2WD L4-2.5L (2009)
Exhaust Pipe: Service and Repair
Exhaust Downpipe
Exhaust Downpipe - 2.5L
Removal and Installation
1. With the vehicle in NEUTRAL, Position it on a hoist.
2. Remove the exhaust intermediate pipe. For additional information, refer to Exhaust Intermediate Pipe - 2.5L, Hybrid .
3. Remove the 2 exhaust bracket bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
4. Remove the 2 exhaust downpipe-to-exhaust manifold nuts and the exhaust downpipe.
-
To install, tighten to 40 Nm (30 lb-ft).
5. To install, reverse the removal procedure.
-
Install new gaskets and nuts.
