Escape 2WD L4-2.5L (2009)
Condenser HVAC: Service and Repair
Condenser Core - 2.5L, 3.0L (4V)
Removal and Installation
NOTE: If a condenser core leak is suspected, the condenser core must be leak tested before it is removed from the vehicle.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Recover the refrigerant.
3. Remove the front bumper cover.
4. Remove the 4 radiator bracket bolts.
-
To install, tighten to 8 Nm (71 lb-in).
