Escape 2WD L4-2.5L (2009)
13. With pliers on the flat metal end of the driveshaft safety cable, bend cable end upward to ensure cable is equal spaced between the new heat shield
and resonator. (Figure 4)
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100305A
2009 Escape, Mariner
0.6 Hr.
2.5L: Replace The Muffler
Assembly Following The
Service Procedure (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
5230
42
Disclaimer