ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fog/Driving Lamp Bulb|Service and Repair|Page 9161 > < Door Switch|Locations|Page 9156
Page 1
background image

Fog/Driving Lamp Bulb: Service and Repair

Fog Lamp Bulb

Mariner

Escape

Removal and Installation

WARNING: The bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the
bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.

NOTICE: The fog lamp bulb should not be removed from the fog lamp until just before a new bulb is installed. Removing the bulb for an
extended period of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and
reflector. Never turn on the fog lamps with the bulb removed.

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

All vehicles

Fog/Driving Lamp Bulb|Service and Repair|Page 9161 > < Door Switch|Locations|Page 9156