Escape 2WD L4-2.5L (2009)
Drive Belt: Service and Repair
Accessory Drive Belt
Accessory Drive Belt
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the pin-type retainer, 5 bolts and the RH splash shield.
-
To install, tighten to 9 Nm (80 lb-in).
3. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the coolant pump pulley.
-
Remove the accessory drive belt from the engine.
4. To install, reverse the removal procedure.