Campaign for Enhanced Automatic Transmission Durability Update
Remove the nut and the 22 Torx(R) bolts and remove the main control assembly. See Figure 4.
10. Remove and discard the main control-to-transaxle case separator plate.
11. Remove and discard the forward (1, 2, 3, 4) clutch and low/reverse clutch transaxle case-to-center support seals. See Figure 5.
1. Forward (1, 2, 3, 4) clutch transaxle case-to-center support seal.
2. Low/reverse clutch transaxle case-to-center support seal.