Escape 2WD L4-2.5L (2009)
3. Lower the height adjuster and remove the upper bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
4. Raise the height adjuster and remove the lower bolt and height adjuster.
-
To install, tighten to 48 Nm (35 lb-ft).
5. To install, reverse the removal procedure.
6. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.