Escape 2WD L4-2.5L (2009)
A2 CHECK CIRCUIT GD182 (BK/GY) FOR AN OPEN
-
Ignition OFF.
-
Measure the resistance between DC/AC inverter C2293a-6, circuit GD182 (BK/GY), harness side and ground.
-
Is the resistance less than 5 ohms?
Yes
GO to A3.
No
REPAIR the circuit. TEST the system for normal operation.
-------------------------------------------------
A3 CHECK CIRCUITS HYA01 (OG/GN) AND HYA02 (OG/WH) FOR AN OPEN
-
Disconnect: AC Power Point C2292.
-
Disconnect: DC/AC Inverter C2293b.
-
Measure the resistance between DC/AC inverter C2293b-1, circuit HYA01 (OG/GN), harness side and AC power point C2292-1 circuit HYA01
(OG/GN), harness side;
-
Measure the resistance between DC/AC inverter C2293b-5, circuit HYA02 (OG/WH), harness side and AC power point C2292-3 circuit HYA02
(OG/WH), harness side.
-
Are the resistances less than 5 ohms?
Yes
GO to A4.
No
REPAIR the circuit. TEST the system for normal operation.
-------------------------------------------------
A4 CHECK THE AC POWER POINT FOR AN OPEN
-
Measure the resistance between AC power point C2292-1, component side and AC power point C2292-2.
-
Measure the resistance between AC power point C2292-3, component side and AC power point C2292-1.