Escape 2WD L4-2.5L (2009)
Seals and Gaskets: Service and Repair
Manual Control Lever Shaft Seal
Manual Control Lever Shaft Seal
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
3.0L engine
2. Remove the Air Cleaner (ACL) outlet pipe.
2.5L engine
3. Remove the ACL outlet pipe.
All vehicles
4. Remove the retainers and the LH splash shield.
3.0L engines
5. Remove the retainers and the RH splash shield.
All vehicles
6. Remove the transmission fluid drain plug and allow the transmission fluid to drain.