Escape 2WD L4-2.5L (2009)
5. Remove the cross brace nut and remove the brace.
6. Remove the 2 bolts from the lower front insulator and remove the lower front insulator.
Installation
1. Install a new lower front insulator onto the cross brace and install the lower front insulator cross brace bolts.
-
Tighten to 115 Nm (85 lb-ft).
2. Position the cross brace in place and install the nut.
-
Tighten to 175 Nm (129 lb-ft).
3. Install the 2 bolts for the cross brace.
-
Tighten to 90 Nm (66 lb-ft).
4. Install the lower front support insulator through bolt for the mount.
-
Tighten to 103 Nm (76 lb-ft).
5. Install the rear cross brace and the 4 bolts.
-
Tighten to 115 Nm (85 lb-ft).