Escape 2WD L4-2.5L (2009)
4. Determine the part number suffix by checking the solenoid service band number etched on the side of the solenoid. The band number is the third
digit on the side of the solenoid and will be a 1, 2, 3, 4 or 5. Use the following table to determine the part number suffix and match the new
solenoid base part number and suffix with the old solenoid.
5. Install the Leadframe Guide Pins in the solenoid body to align the lead frame for installation.
6. Position the leadframe on the Leadframe Guide Pins and carefully install the leadframe by pushing straight down into the solenoids.
7. Remove the Leadframe Guide Pins.
8. Install the 5 leadframe screws.
