Escape 2WD L4-2.5L (2009)
Shifter M/T: Service and Repair
Gearshift Lever
Gearshift Lever
Removal
1. Remove the gearshift lever knob and boot assembly.
2. Remove the floor console finish panel.
3. Remove the 2 gearshift cable clips.
4. Carefully disconnect the gearshift cables from the gearshift lever.
5. Remove the 4 gearshift lever nuts.
6. Remove the gearshift lever.
Installation
1. Position the gearshift lever.
2. Connect the gearshift cables to the gearshift lever.
