Escape 2WD L4-2.5L (2009)
-
To install, tighten to 103 Nm (76 lb-ft).
6. Remove the 3 nuts and the LH transaxle support insulator bracket.
-
To install, tighten to 40 Nm (30 lb-ft).
7. To install, reverse the removal procedure.
Transaxle Front Support Insulator
Transaxle Front Support Insulator
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Using the Engine Support Bar, support the engine.
