Escape 2WD L4-2.5L Hybrid (2010)
Parking Assist Warning Indicator: Service and Repair
Parking Aid Sensor
NOTE: Bumper shown removed for clarity.
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Using a suitable tool, (such as a flat-blade screwdriver), gently pry the retaining tabs and remove the parking aid sensor(s).
-
Disconnect the electrical connectors.
3. To install, reverse the removal procedure.
-
Using the scan tool, verify that the parking aid sensor PIDs read no object present and that the parking aid sensor attenuation PIDs read
between 0.8-1.6 ms.
-
Carry out the azimuth and elevation system check to verify the sensor(s) are operating correctly. For additional information, refer to Azimuth
System Check See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and Inspection/Component
Tests and General Diagnostics/Parking Aid/Azimuth System Check and Elevation System Check See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Testing and Inspection/Component Tests and General Diagnostics/Parking
Aid/Elevation System Check.