ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicle Lifting > < A/T - Vehicle Flat Towing Guidelines
Page 2
background image

These guidelines are designed to prevent damage to the transmission due to overheating.

If setting the fluid level for a customer that will be recreational (flat) towing the vehicle, set the level between minimum line and the minimum hole at the
bottom of the hash marks on dipstick (Figure 1) per WSM Section 307-01.

NOTE

THERE IS A SIGNIFICANT DIFFERENCE IN TRANSMISSION DIPSTICK READINGS BETWEEN A COLD TRANSMISSION AND A
TRANSMISSION AT OPERATING TEMPERATURE. FAILURE TO CHECK TRANS FLUID LEVEL AT TRANS OPERATING
TEMPERATURE, PER WSM SECTION 307-01 MAY RESULT IN DAMAGE TO THE TRANSMISSION.

If the vehicle is a 2009 Escape or Mariner and built on or before 10/28/2008 the dipstick does not have Minimum - Maximum lines outside of hash
marks, then replace dipstick.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

MT092013

Use SLTS Operations If

Actual

Available; Claim Additional

Time

Diagnosis Or Labor
Performed As Actual Time.

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7000

42

Disclaimer

Vehicle Lifting > < A/T - Vehicle Flat Towing Guidelines