Escape 2WD L4-2.5L Hybrid (2010)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder
Removal and Installation
NOTE: For non-functional ignition lock cylinders, the steering column lock module has to be replaced. For additional information, refer to Steering
1. Remove the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to Antitheft and Alarm Systems.
2. NOTE: The ignition lock cylinder must be in the RUN position.
Using a suitable tool (such as a pick), press the release pin and remove the ignition lock cylinder.
3. To install, reverse the removal procedure.
Verify the ignition lock cylinder operation.