Escape 2WD L4-2.5L Hybrid (2010)
8. Install the Engine Lifting Chain and Adapter and support the engine and transaxle.
All vehicles
9. Remove the LH support insulator.
1. Remove the LH support insulator through bolt.
-
To install, tighten to 103 Nm (76 lb-ft).
2. Remove the top LH support insulator bolts.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the side LH support insulator bolts.
-
To install, tighten to 48 Nm (35 lb-ft).
4. Remove the LH support insulator.
10. To install, reverse the removal procedure.