Escape 2WD V6-182 3.0L VIN 1 SFI (2002)
7. Using the special tool, separate the halfshaft from the wheel knuckle.
^
Position the halfshaft aside and support.
8. Remove the wheel knuckle.
1. Remove the strut-to-wheel knuckle bolts.
2. Remove the wheel knuckle.
9. Using the special tool, press the wheel hub from the wheel bearing and knuckle.
10. NOTE: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle, after removing the wheel hub.
Using the special tool, press the inner wheel bearing race from the wheel hub.