Escape 2WD V6-182 3.0L VIN 1 SFI (2002)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Material
Materials
Removal
1. Raise and support the vehicle.
2. Remove the LH front wheel.
3. Remove the splash shield.
4. Place a drain pan beneath the turbine shaft speed (TSS) sensor.
5. Remove the TSS sensor.
^
Disconnect the TSS sensor electrical connector.
^
Remove the bolt.
^
Inspect the TSS sensor bore.