Escape 2WD V6-3.0L (2009)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber and Caster Adjustment
Front Camber and Caster Adjustment
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 4 front strut upper mounting bracket nuts.
3. Push the front strut mounting bracket downward and turn it to the desired position to set the camber and caster. Both camber and caster for the
front suspension are adjustable. For additional information, refer to Steps 4 and 5.
4. NOTE: Notice the position of the strut rod in each position.
NOTE: Arrows shown in illustrations are pointing towards the front of the vehicle.
Use the following table for LH side camber and or caster adjustment.
5. NOTE: Notice the position of the strut rod in each position.
NOTE: Arrows shown in illustrations are pointing towards the front of the vehicle.
Use the following table for the RH side camber and or caster adjustment.
