Escape 2WD V6-3.0L (2009)
1. Remove the 2 bolts and separate the main control valve body from the solenoid body. See Figure 31.
2. Remove and discard the separator plate from the solenoid body. Install the new separator plate from the new main control valve body.
3. Position the new main control valve body on the solenoid body assembly and install the 2 bolts. See Figure 32.
^
Tighten to 10 Nm (89 lb-in).
Overdrive/Direct Clutch (4,5,6) Disassembly and Assembly
1. Remove the Overdrive (O/D) (4, 5, 6) clutch hub.
