Escape 2WD V6-3.0L (2009)
Removal
NOTICE: Automatic transmission fluids are not interchangeable transmission fluids. The use of any fluid other than what is recommended for
this transaxle will cause transaxle damage.
1. Remove the front bumper cover.
2. Remove the left side splash shield.
3. Release the transmission fluid cooler tube retaining clip and remove the transmission fluid cooler tubes from the clip.
4. Compress the constant tension clamps and remove the transmission fluid cooler tubes from the transmission fluid cooler.
5. Remove the secondary latches from the transmission fluid cooler tubes at the transmission.
6. Using the Transmission Cooler Line Disconnect Tool, disconnect the transmission fluid cooler tubes from the transaxle and remove the
transmission fluid cooler tubes.