Escape 2WD V6-3.0L VIN 1 (2004)
1
Remove the four bolts.
2
Remove the two A-pillar passenger assist handles.
3. Remove the two windshield side garnish mouldings.
4. Remove the overhead console.
1
Open the front console door.
2
Remove the screws.
3
Remove the overhead console.
-
If equipped, disconnect electrical connector.
5. Remove the two sun visors and two clips.
1
Remove the six screws.
2
Remove the sun visors and clips.
6. Remove the driver and passenger assist handles.
7. Remove the interior rear view mirror.
8. Lower the front portion of the headliner.
9. Remove the cowl grille.
10. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
