ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Restraints Control Module (RCM)|Page 8010 > < Restraints Control Module (RCM)|Page 8008
Page 11
background image

VEHICLE SAFETY STANDARDS.

21. Connect the driver air bag module electrical connector.

22. Install the steering wheel access cover.
23. Connect the battery ground cable.
24. With all the restraint system diagnostic tools removed, prove out the air bag system.  See: Air Bag Systems/Air Bag(s) Arming and

Disarming/Service and Repair/Prove Out Procedure

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

Vehicles Without Side Air Bags

Special Tool(s)

SPECIAL TOOL(S)

REMOVAL

Restraints Control Module (RCM)|Page 8010 > < Restraints Control Module (RCM)|Page 8008