Escape 4WD L4-2.3L VIN H Hybrid (2005)
Current Flow (1)
Each cell normally starts with the component that powers the circuit, such as a fuse or the ignition switch. Current flow is shown from the power source
at the top of the page to ground at the bottom of the page. A full representation of the power supply of a fuse or the power distribution from a fuse to
various components is given in cell 13 "Power Distribution". Full representation of the ground connections are show in cell 10 "Grounds".
Switch Positions (2)
Within a schematic, all switches, sensors and relays are shown "at rest" (as if the ignition switch were OFF).
Splices (3)
Splices directly connecting to the power distribution are best represented on the power distribution schematic in cell 13 "Power Distribution". Splices