Escape 4WD L4-2.5L (2010)
Entertainment System Control Panel: Service and Repair
Front Controls Interface Module (FCIM)
Front Controls Interface Module (FCIM)
Removal and Installation
NOTE: If the Front Controls Interface Module (FCIM) is being replaced, it must be replaced as an assembly with the middle center instrument panel
center finish panel. However, the middle center instrument panel center finish panel can be replaced individually if the FCIM does not need to be
replaced. For additional information on installing a new middle instrument panel center finish panel, refer to Instrument Cluster / Carrier &/or Interior
Moulding / Trim.
1. Remove the Audio Control Module (ACM). For additional information, refer to Audio Control Module (ACM) See: Cellular
Phone/Communications Control Module/Service and Repair/Removal and Replacement/Audio Control Module (ACM).
2. To install, reverse the removal procedure.