Escape 4WD L4-2.5L (2010)
10. Feed the side air bag module deployment chute and J-clips out through the side air bag module seat backrest foam opening.
11. Continue to roll the seat backrest trim cover up to access the side air bag module.
12. Detach the 2 side air bag module wiring harness retainers from the seat backrest frame.
13. Through the back of the seat backrest, position out the seat backrest foam pad. Remove the 2 side air bag module nuts and remove the side air bag
module.
Installation
WARNING: Inspect the seat side air bag module and mounting surfaces for any damage or foreign material before installing the seat side air
bag module. If any damage is found, install new components. If any foreign material is found, remove it. Failure to follow these instructions
may result in the seat side air bag module deploying incorrectly and increase the risk of serious personal injury or death in a crash.
WARNING: Before installing the seat side air bag module/deployment chute assembly:
-
Inspect the side air bag module and mounting surfaces for any damage or foreign material.
-
Remove any foreign material from the mounting surfaces of the deployment chute, the seat backrest frame mounting bracket and the air
bag module cavity in the seat backrest foam pad.
-
Install new parts if damaged.
Failure to follow these instructions may result in the seat side air bag deploying incorrectly, which increases the risk of serious personal injury
or death in a crash.
WARNING: If the seat side air bag cover has been damaged or separated from its mounting, or if the air bag material has been exposed, install
a new seat side air bag module. Never try to repair the seat side air bag module. Failure to follow these instructions may result in the seat side
air bag deploying incorrectly, which increases the risk of serious personal injury or death in a crash.
NOTICE: Make sure the side air bag module wiring harness is not pinched between the side air bag module and the mounting bracket. Failure
to follow this instruction may result in wiring harness damage and may cause system failure.
All seats
