Escape 4WD L4-2.5L Hybrid (2009)
10. Position the new bumper grille on the bumper cover slots and push in to engage the snap tabs.
11. Install the lower push pin.
12. Re-position wiring harness.
13. Install radiator grille to bumper cover, refer to WSM, Section 501-08.
14. Install the bumper cover assembly, refer to WSM section 501-19.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
092612A
2008-2009 Escape:
0.3 Hr.
Replace The Radiator
Grille Following The
Service Procedure (Do Not
Use With Any Other Labor
Operations)
092612B
2008-2009 Escape:
0.8 Hr.
Replace The Bumper Grille
And The Radiator Grille If
Necessary Following The
Service Procedure Includes
Time To Remove And
Install The Bumper Cover
(Do Not Use With Any
Other Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
8150
34
Disclaimer