Escape 4WD L4-2.5L Hybrid (2009)
6. Remove the 2 screws and the overhead console.
-
Disconnect the electrical connector.
7. Remove the LH and RH sun visors.
-
If equipped, disconnect the electrical connectors.
8. NOTE: Do not fully remove the retaining screws from the sun visor clips.
Remove the LH and RH sun visor clips.
-
Partially remove the retaining screws from the sun visor clips.
-
Pull downward on the sun visor clips to remove them from the headliner.
9. Using a small flat screwdriver, release and remove the interior lamp lens.
10. Remove the interior lamp.
-
Early build, remove the 2 screws.
-
Late build, remove the 2 pushpins.
-
Disconnect the electrical connector.
11. Remove the cargo lamp.
-
Disconnect the electrical connector.
12. Remove the 3 child seat tether anchor covers.
13. Remove the 3 bolts and the child seat tether anchors.
-
To install, tighten to 22 Nm (16 lb-ft).
14. If equipped, remove the screw and the garment hook.