Escape 4WD L4-2.5L Hybrid (2009)
Power Trunk / Liftgate Lock Switch: Service and Repair
Liftgate Release Switch
Liftgate Release Switch
Removal and Installation
1. Remove the liftgate trim panel.
2. Remove the 4 liftgate trim bezel nuts and remove the bezel from the liftgate.
-
To install, tighten to 8 Nm (71 lb-in).
-
Disconnect the electrical connector.
-
Using the appropriate tool, press the tabs and remove the liftgate release switch.
3. To install, reverse the removal procedure.