Escape 4WD L4-2.5L Hybrid (2009)
-
Reposition the wheel cylinder dust boot.
12. Push the trailing shoe into the wheel cylinder until the shoe bottoms out.
13. Pull back the wheel cylinder dust boot (opposite depressed shoe) and apply the specified lubricant around the wheel cylinder piston.
-
Reposition the wheel cylinder dust boot.
14. Once both wheel cylinder pistons have been lubricated, push the pistons side-to-side at least 3 times to distribute the lubricant and make sure of
smooth movement.
15. Install the lower return spring.
16. Install the upper return spring.
17. Install the brake drum. For additional information, refer to Brake Drum See: Drum Brake System/Brake Drum/Service and Repair.
-
Adjust the rear brake shoes. For additional information, refer to Brake Shoe Adjustment See: Drum Brake System/Brake Shoe/Adjustments.
18. Bleed the wheel cylinder.