Escape 4WD Hybrid 25L Engine Timing Chain Component Diagrams - Page 1803
NOTICE: The Camshaft Alignment Plate 303-465 is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine
damage.
Install the Camshaft Alignment Plate in the slots on the rear of both camshafts.
Install the camshaft sprockets and the bolts. Do not tighten the bolts at this time.
Install the timing chain.
NOTICE: The Camshaft Alignment Plate 303-465 is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine
damage.
Using the flats on the camshafts to prevent camshaft rotation, tighten the bolts.
NOTE: Do not install the crankshaft pulley bolt at this time.
NOTE: Apply clean engine oil on the seal area before installing.
Position the crankshaft pulley onto the crankshaft with the hole in the pulley at the 6 o'clock position.