Escape 4WD L4-2.5L Hybrid (2009)
electrical arcing, which increases both the risk of fires and serious personal injury.
Remove the 2 DC/DC converter low voltage battery cable nuts and remove the low voltage battery cables.
-
To install, tighten to 12 Nm (106 lb-in).
9. Disconnect the DC/DC converter low voltage electrical connector.
10. Remove the 3 DC/DC converter nuts.
-
To install, tighten to 12 Nm (106 lb-in).
11. Remove the DC/DC converter assembly.
12. To install, reverse the removal procedure.