ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Relays and Modules - Hybrid Drive > < DC/AC Inverter Module|Page 2141
Page 1
background image

Voltage Inverter: Description and Operation

Generator Shut Down (GSDN)

The PCM keeps the generator motor inverter enabled by continuously toggling the generator motor shut down (GMSDN) output. Typical output
frequency varies between 49 and 75 Hz at 50% duty cycle. The PCM also broadcasts a redundant not shutdown message to the TCM over the
communication link. When a concern condition is detected, the PCM stops generating this frequency signal and broadcasts a shutdown message to the
TCM over the communication link. The TCM then disables the generator motor inverter and sets an appropriate DTC. In the event of GMSDN circuit
failure, the PCM still broadcasts a not shutdown message but the hard wire signal frequency is out of expected range. If the circuit becomes open, the
vehicle shutdowns and the TCM sets the appropriate DTC.

Relays and Modules - Hybrid Drive > < DC/AC Inverter Module|Page 2141