Escape 4WD L4-2.5L Hybrid (2009)
Hybrid
-
Are the resistances less than 5 ohms?
Yes
GO to B3.
No
REPAIR the circuit. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
B3 CHECK THE HS-CAN CIRCUITS BETWEEN THE ABS MODULE AND THE DLC FOR AN OPEN
-
Measure the resistance between the ABS module C155-12, circuit VDB04 (WH/BU), harness side and the DLC C251-6, circuit VDB04
(WH/BU), harness side.
-
Measure the resistance between the ABS module C155-13, circuit VDB05 (WH), harness side and the DLC C251-14, circuit VDB05 (WH),
harness side.
-
Are the resistances less than 5 ohms?
Yes
CONNECT the negative battery cable. GO to B4.
No
REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
B4 CHECK FOR CORRECT ABS MODULE OPERATION
