ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2636 > < Initial Inspection and Diagnostic Overview|Page 2634
Page 53
background image

-

Is the resistance less than 5 ohms?

Yes

GO to S12.

No

CONNECT the negative battery cable. GO to S31.

-------------------------------------------------
S12 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ABS MODULE DISCONNECTED

-

Disconnect: ABS Module C155 .

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a 4X4 control module, GO to S13.

If the vehicle is not equipped with a 4X4 control module, GO to S14.

No

CONNECT the negative battery cable. GO to S32.

-------------------------------------------------
S13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE 4X4 CONTROL MODULE
DISCONNECTED

-

Disconnect: 4X4 Control Module C3184.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to S14.

No

CONNECT the negative battery cable. GO to S33.

-------------------------------------------------

Initial Inspection and Diagnostic Overview|Page 2636 > < Initial Inspection and Diagnostic Overview|Page 2634