Escape 4WD L4-2.5L Hybrid (2009)
-
Depress and hold the brake pedal.
-
Fully depress and hold the accelerator pedal.
-
Turn the key to the START position and crank the engine a minimum of 5 compression strokes and record the highest reading. Return the key
to the ON position.
-
Release the accelerator pedal.
-
Release the brake pedal.
7. Repeat the test on each cylinder, cranking the engine approximately the same number of compression strokes.
8. Position the key to the OFF position to deactivate the cranking diagnostic mode.
9. Clear all DTCs.
