Escape 4WD L4-2.5L Hybrid (2009)
Removal and Installation
1. Remove the Air Cleaner (ACL) assembly.
2. Install the Engine Support Bar, Support Leg Adapter, Engine Support Bar Adapter and Lifting Hook Adapter.
3. Remove the upper insulator bracket bolts and the bracket.
-
To install, tighten to 25 Nm (18 lb-ft).
4. Remove the upper insulator.
1. Remove the upper insulator nuts.
-
To install, tighten to 90 Nm (66 lb-ft).
2. Remove the upper insulator through bolt.
-
To install, tighten the bolt to 103 Nm (76 lb-ft).
5. To install, reverse the removal procedure.
