Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
4. Install the front seat cushion trim and pad to the front seat cushion frame.
-
If equipped with heated seats, connect the seat cushion heated grid electrical connector to the seat wiring harness.
5. Connect the seat cushion trim cover J-clips.
6. Install the front seat backrest.
1
Install the backrest.
2
Install the pivot nut.
7. Install the front seat backrest bolts.
-
If equipped with heated seats, connect the backrest heated grid electrical connector.