Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
18. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove may result in personal injury and possible violation of vehicle safety standards.
Remove the special tool from the driver side safety belt pretensioner body harness electrical connector.
19. Connect the driver safety belt pretensioner electrical connector.
20. Connect the battery ground cable.
21. With the remaining special tools still in place, prove out the air bag system.
22. Disconnect the battery ground cable and wait at least one minute.
23. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove may result in personal injury and possible violation of vehicle safety standards.
Remove the special tool from the passenger safety belt pretensioner body harness electrical connector.
24. Connect the passenger safety belt pretensioner electrical connector.