Driver Seat Track Repair for Escape 4WD V6-181 30L DOHC VIN 1 Duratec
-
If equipped with heated seats, disconnect the heated seat electrical connector.
22. Remove the outboard seat cushion side shield.
1
Remove the seat backrest handle.
2
Remove the screw.
3
Remove the shield.
-
If equipped with heated seats, disconnect the electrical connector.
23. Remove the inboard seat cushion side shield.
24. Remove the front seat backrest bolts.
25. NOTE: If equipped with a side air bag module, note the routing of the wiring harness for installation.
Remove the front seat backrest.