Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-2564011.png)
10. Install the outboard seat cushion side shield.
-
If equipped with heated seats, connect the electrical connector.
1
Install the shield.
2
Install the screw.
3
Install the seat backrest handle.
11. CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle
may result in damaged components.
Install the passenger seat.
1
Position the passenger seat.
2
Install the seat track to floor bolts.
-
If equipped with heated seats, connect the heated seat connector.
12. Position the passenger seat forward.
13. Install the seat track to floor nuts.
Vehicles with side air bag