Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-1800003.png)
3. Install the primary piston assembly
4. Install the snap ring.
5. Install the seals
^
Lubricate the seals with clean brake fluid and insert the seals into the brake master cylinder.
6. Install the brake master cylinder reservoir.
^
Press the brake master cylinder reservoir into the seals until it snaps in securely.
7. Install master cylinder.