Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Engine Block Heater: Service and Repair
Block Heater
Removal and Installation
1. Drain the cooling system.
2. Raise the vehicle.
3. Disconnect the block heater power cable from the block heater.
4. CAUTION: Do not loosen the block heater retaining screw more than necessary for removal.
Remove the block heater.
5. CAUTION: Make sure the power cable is routed and secured away from rotating or hot components or damage to the cable can occur.
To install, reverse the removal procedure.