Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
NOTE: Position the clutch field coil on the A/C compressor as previously marked.
3. Install the A/C clutch pulley.
NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head. It must be correctly aligned during installation.
4. Install the pulley snap ring with the bevel side out.
5. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
6. Install the disk and hub assembly.
