Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
4. If the A/C evaporator core orifice is broken, screw the end of the special tool into the broken A/C evaporator core orifice.
5. Hold the special tool T-handle stationary and rotate the special tool body to remove the broken A/C evaporator core orifice.
INSTALLATION
1. Lubricate and install the O-ring seals on the A/C evaporator core orifice.
^
Use PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.
2. Place the A/C evaporator core orifice into the special tool.
3. Using the special tool, insert the A/C evaporator core orifice into the condenser to evaporator line until seated.