Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-2668006.png)
1. Disconnect battery ground cable.
2. Strip wires to appropriate length.
3. Install heat shrink tubing.
4. Twist wires together.
5. Solder wires together.
NOTE: Use Rosin Core Mildly-Activated (RMA) solder. Do not use acid core solder.