Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-1150001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL
1. Partially drain the cooling system.
2. Remove the Engine Coolant Temperature (ECT) sensor.
1
Disconnect the electrical connector.
2
Unclip and remove the sensor.
INSTALLATION
1. To install, reverse the removal procedure.