Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
15. Disconnect the power point connector, if equipped and remove the rear quarter trim panel.
Both rear safety belt retractors
16. Remove the rear safety belt retractor.
1
Using the special tool, remove the bolt.
2
Remove the rear safety belt retractor.
INSTALLATION
Both rear safety belt retractors
1. Install the rear safety belt retractor.
1
Position the rear safety belt retractor to the C-pillar.
2
Using the special tool, install the bolt.
LH side only